Bowed Wall Repair: What is the Best Solution?

bowed wall in basement

Foundation settling is typically expected in any home, and you may even see small cracks because of it. But sometimes you might see a large horizontal crack across the wall with the wall looking like it is angled inward. This is called a bowed wall. When too much exterior water presses against your foundation wall, it can cause the wall to crack and bow. Bowed walls are a common problem for homeowners, especially areas that see a lot of rain and melting snow, but that does not mean that it shouldn’t be taken seriously. Bowed walls have a possibility of collapsing, so you should always seek repair as soon as possible. Jerry’s Waterproofing has multiple bowed wall repair solutions that can get your house back to top shape. 

Signs of a Bowing Wall

Usually, by the time you notice a bowed wall, the structural damage has likely been there for a while.  Here are some signs to look for so you can catch the problem before it gets out of hand: 

  • Cracked Brickwork
  • Leaning Chimneys
  • Misaligned Doors and Windows
  • Unlevel Floors
  • Wall Cracks
  • Interior Drywall and Plaster Cracking

Bowed Wall Solutions

Our repair solutions are designed to permanently repair your bowing walls. One of our professionals can help you determine which one is the right one for your situation:

  • Helical Piers are like large screws that are screwed directly into the soil to support your foundation. Since they are easy to install, they can be installed in all types of weather with little to no disturbance to your landscaping surrounding your house. The load transfer is immediate, so this solution is not only easy but also time efficient. 
  • Helical Tiebacks are similar to helical piers in that they are screwed into the soil around your home. But helical tiebacks are screwed in next to the bowing wall instead of under the foundation. Anchors are attached to the interior of the wall, and the wall straightens and stabilizes back to its original state. No grout or cement is needed, so it is another quick and effective solution.
  • Plate Anchors use two plates, one outside the bowed wall installed in the soil and one on the interior of the wall. These plates are connected by a rod and tightened straighten the wall back to its original level. Plate anchors strengthen the wall so it won’t bow or lean in the future. 
  • Carbon Fiber wall supports connect the foundation to the frame of the structure. A strip of carbon fiber is attached to the top of the wall with a sill plate, and then the bottom of the strip is anchored to the wall. This solution can be applied to block or poured concrete. It not only repairs and prevents bowing walls, but it also repairs foundation cracks. This is an easy and inexpensive support solution that is nearly invisible when painted over. 

Each solution has its benefits, and all of them are installed with the best quality products. The professionals at Jerry’s Waterproofing can evaluate your home and work with you to find a permanent solution to repair your foundation. Contact us today to learn more about bowed wall repair and get a free quote.